Lathe style machine
Device performance: turning and drilling
Working diameter: 50 and 70 cm and supported up to 260 cm.
If the piece is opened, it can be cut into 70 cm and 20 cm width.
Working length: 110 to 300 cm
Working accuracy: up to 0.05 mm
CNC milling machine
Machine performance: drilling, grooving, angle cutting and floor turning, it has the ability to turn in different shapes.
Working X-axis: 2 meters long
Working Y-axis: 70 cm wide
Working Height: 1.1 meters
Working accuracy: 0.05 mm
Boring machine
Machine efficiency: flat turning, hole turning
Working width: 100 cm
Working Length: 110 cm
Spindle: 100 cm with the ability to move forward
Working Height: 1.5 meters
Working accuracy: up to 0.1 mm
Radial drill machine
Device performance: only drilling and nailing, this device has the ability to rotate and perform drilling at different angles
Working Height: 1.5 meters
Working diameter: 6 meters
Heavy lathe machine
Machine performance: round turning, diameter turning, bottom turning and surface turning
Working length: 5 meters
Working diameter: 2 meters (the support is used up to the diameter of 180 cm below)
Types of welding equipment:
3-phase rectifiers
Argon gas welding device
American lathe machine open piece
Device performance: turning and drilling
Working length: 1.5 meters
Working diameter: 70 cm
Working accuracy: up to 0.1 mm
Lathe machine
Device performance: floor grinding, sharpening, forehead grinding
Working length: 80 cm
Working width: 50 cm
Working Height: 40 cm
Rolling machine
Maximum sheet thickness: 12 mm
Maximum sheet width: 2.5 meters
Minimum inner Ø: 250 mm
CNC air gas cutting machine
This machine is able to cut steel sheets and alloy steel is not cut.
Air gas cutting from 4 to 150 mm thick
Gas consumption: air, CO2 and nitrogen
Plasma cutting machine (CNC MICROSTEP)
Iron and steel sheets can be cut by this device
Machine table: 1.5 x 2
Thickness: 0.06 to 20 mm
Gas consumption: air-air, CO2 and nitrogen
Waterjet CNC cutting machine
Device performance: cutting all kinds of metals, stones, wood, glass, etc.
Machine Table: 2 x 6
KURF cut: 0.76 mm nozzle exit
Two types of Balance Machine, fixed and portable
Balance capability from 10 kg to 15 tons.
Dynamic and static balancing capability.
Balance capability with a maximum length of 6 meters
Ability to use different rotational speeds for each piece.
The minimum balance speed is 60 (rpm) and the maximum is 1500 (rpm).
The ability to balance in two ways: loading and unloading
Carousel machine
The efficiency of the machine is: floor-turning, hole-turning, face-turning, and round-turning at the same time (machine working with two arms at the same time).
Maximum bearable load: 5 tons
Maximum working diameter: up to 3000 mm
Minimum working diameter: 200 mm
Maximum working height: 1.5 meters
Working accuracy: up to 0.1 mm